Keterangan :
Dwyer 2000-100MM Magnehelic® Differential Pressure Gage, range 0-100 mm w.c., minor divisions 2.0.
We as a sales Center for Dwyer 2000-100MM Magnehelic® Differential Pressure Gage
serving free delivery for Jakarta and surrounding areas, please contact
our sales at Mobile: 0812 8380 4273, WA: 0819 3263 2003. for complete
information and how to order LK JDW450 Siren in Stores Online Darmatek, DKI Jakarta- Service:
- Air and non-combustible, compatible gases. (Natural Gas option available.)
- Note:
- May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
- Wetted Materials:
- Consult factory.
- Housing:
- with Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
- Accuracy:
- it's ±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
- Pressure Limits:
- -20 in Hg. and to 15 psig.† (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
- Overpressure:
- with Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
- Temperature Limits:
- 20 to 140°F.* (-6.67 to 60°C).
- Size:
- 4" (101.6 mm) diameter dial face.
- Mounting Orientation:
- Diaphragm in vertical position. Consult factory for other position orientations.
- Process Connections:
- Low pressure taps and 1/8" female NPT duplicate high - one pair side and one pair back.
- Weight:
- with 1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
- Standard Accessories:
- with Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (with Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
- Agency Approval:
- RoHS. (Note: -SP models not RoHS approved.)
Tidak ada komentar:
Posting Komentar