Tuesday, November 22, 2016

Jual Hioki PW3360-21 Clamp On Power Meters

Darmatek $0.00

HIOKI PW3360-21 Clamp On Power Meters are multi-channel power measuring devices utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines.

The PW3360-20 and PW3360-21 monitor power demand and other power parameters to aid in energy audits and validate energy saving measures.
  • CLAMP ON POWER LOGGER PW3360-20 (Main unit only)
  • CLAMP ON POWER LOGGER PW3360-21 (Harmonic analysis model)

Note: At least one optional current sensor is necessary to measure current or power parameters. To store measurement data, use only the guaranteed SD cards sold by HIOKI.

Overview :

Supports single to three-phase, 4-wire circuits Measure up to 780V with a 1000V display range Simultaneously measure up to three single-phase, 2-wire circuits (in the same power system)

Broadly applicable for many jobs, including leakage current measurement (An optional clamp-on leakage sensor supports measurements as low as 50 mA) Store months of data on SD cards The QUICK SET function guides you in making the right connections Choose PW3360-21 for harmonic measurements up to the 40th order

■ Basic specifications :



Measurement line & number of circuits
50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
Measurement items
Voltage/current RMS, voltage/current fundamental wave value, voltage /current fundamental wave phase angle, frequency, voltage waveform peak (absolute value), current waveform peak (absolute value), active/reactive/ apparent power, power factor (lag/lead) or displacement power factor (lag/lead), active energy (consumption, regeneration), reactive energy (consumption, regeneration), active power demand quantity (consumption, regeneration), reactive power demand quantity (lag/lead), active power demand value (consumption, regeneration), reactive power demand value (lag/lead), power factor demand, energy cost
Pulse input
[PW3360-21 only]: Harmonic (level of voltage/current/power, content ratio, phase angle, total value, THD-F, THD-R), up to 40th order
Voltage ranges
600 V AC
Current ranges
500.00 mA to 5.0000 kA AC (depends on current sensor in use),
50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
Power ranges
300.00 W to 9.0000 MW (Depends on voltage/current combination and measured line type)
Basic accuracy
Voltage : ±0.3% rdg. ±0.1% f.s
Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1)
Display update rate
0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
Save destination
SD memory card, or internal memory at real time
Data save interval
1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
Save items
Measurement value save: Average only / average, maximum, minimum value
[PW3360-21 only]: Harmonic data save: Average only / average, maximum, minimum value in binary format
Screen copy: BMP form (saved every 5 min. at minimum interval time)
Waveform save: Binary waveform data
Interfaces
SD memory card
HTTP server function, Remote settings by communication program, or data downloads
USB 2.0: When connected to a PC, the SD card and internal memory are recognized as removable storage devices, Remote settings by communication program, or data downloads
Pulse output: proportional to active power consumption when measuring integral power consumption, Isolated open-collector signal
Functions
Connection check, Quick Set navigation guide, clock, pulse input
Power supply
AC Adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter)
Battery Pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 8 hours of continuous use (with back light off)
Dimensions and mass
180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002
180 mm (7.09 in) W × 100 mm (3.94 in) H × 67.2 mm (2.65 in) D, 830 g (29.3 oz) with PW9002
Accessories
Voltage Cord L9438-53 × 1 set, AC Adapter Z1006 × 1, USB cable × 1, Instruction manual × 1, Measurement guide × 1, Color spiral tubes × 1 set: red, yellow, blue/two each, for color-coding clamp sensors, Spiral tubes for grouping clamp sensor cords × 5

===================

Untuk Info dan Pemesanan Hubungi :
DARMATEK
Contact: Subarkah
Telpon : 021-71031268
H P : 081283804273/085774067221
Email : subarkah18@yahoo.co.id
Gmail : darmatek1@gmail.com
Pin BB : D2A771BD
Y M : cs_darmatek
Link : http://darmatek.indonetwork.co.id
http://darmatek01.blogspot.com
http://tokomoisturemeter.blogspot.com
http://sirineindo.blogspot.com
Web : http://www.darmatek.net
Quantity : Add to Cart

No comments:

Post a Comment

Costumer Care


Hotline : 0812-8380-4273
SMS : 0857-7406-7221
WA : 0819-3263-2003
Email : info@darmatek.net
Gmail : darmatek1@gmail.com
Pin BB : D2A771BD

Rekening



No. Rek: 733-0921-913
a.n : SUHARTINI

No. Rek: 0288-773-200
a.n : SUHARTINI

Lacak Resi


Lacak resi JNE di sini
Lacak resi TIKI di sini:
Lacak resi POS Indonesia:

Aman & Terpercaya


Pengunjung