Jual APPA 72 Digital Multimeter

APPA 72 Digital Multimeter

Features APPA 72 Digital Multimeter:

DAY & NIGHT
APPA 73&79 Digital Multimeter have a LED backlit display that turns ON/OFF at the touch of a button, also automatically goes off to save battery life.

OPTICAL RS-232 INTERFACE
APPA 73&79 have RS-232 optical interface to connect to PC for data acquisition and analysis.

BATTERY EASY TO REPLACE
Unscrew only two screws to remove battery door for battery replacement, designed for user's convenience without opening the bottom case.

NEW SLIM DESIGN
Ergonomically designed slim shape with one hand operated knob and buttons. Just fit the palm of your hand and your needs.

EXTRA PROTECTION
Every 70 series meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.

Specifications APPA 72 :

Voltage DC	Range	600.0mV~1000V
	Accuracy	± (0.5%+2d)
	Overload Protection	1000Vrms
Voltage AC	Range	600.0mV~750V
	Accuracy	± (0.9%+5d)
	Frequency Response	50Hz~500Hz
	Overload Protection	1000V rms
Current DC	Range	600.0uA, 6000uA, 6.000A, 10.00A
	Accuracy	± (1.0%+2d)
	Input Protection	600V rms for uA input 10A/500V fast blow fuse for A input
Current AC	Range	6.000A, 10.00A
	Accuracy	± (1.5%+5d)
	Input Protection	10A/500V fast blow fuse for A input
Resistance	Range	600.0?~60.00M?
	Accuracy	± (0.7%+2d)
	Overload Protection	600V rms
Continuity Beeper	<150?, 2kHz tone buzzer
Diode Test	Open Circut Voltage	3V
Frequency Counter	Range	6000Hz~60.00MHz
	Accuracy	± (0.01%+1d)
	Overload Protection	600V rms
Capacitance	Range	6.000nF~6.000mF
	Accuracy	± (1.9%+8d)
	Overload Protection	600V rms

General Specification
Sampling Rate	1.5times/sec
Overload Indication	"OL", "-OL"
Low Battery Indication
Auto Power Off	Approx. 10 minutes
Operating Temperature	0°~ 50°, <80% RH
Storage Temperature	-20°~ 60°
Temperature Coefficient	0.15(Spec. Acc)/?, <18? or >28?
Safety	IEC61010 and designed to meet UL61010 specifications
Power Requirement	Single 9V battery (NEDA 1604 or IEC 6F22)
Battery Life	300 hours
Size	76mm(W) x 158mm(L) x 38mm(H), without holster 82mm(W) x 164mm(L) x 44mm(H), with holster
Weight	400 grams (with holster)
Included with Instrument	Test Leads, Protective holster, ZnC battery(installed) and manual

Add to Cart