Thursday, September 13, 2018

Jual Hashima HN30 Needle-Detector

No comments:
 Darmatek $0.00
 
Jual Hashima HN-30 Needle Detector 

Detail ! 081283804273 HASHIMA Detector HN-30 ( Handheld), Detektor Jarum Pada Pakaian, Hand Needle Detector, Alat Untuk Mendeteksi Jarum Dan Logam Pada Pakaian. Untuk Pemesanan Hub : Darmatek WA : 081932632003, 021- 71031268, 085774067221. Email : subarkah18@yahoo.co.id

MODEL
DETECTION METHOD
 Magnetic induction
DETECTION ABILITY
 Hiφ0.8mm steel at 5mm height from detecting surface
 Lowφ1.0mm steel at 5mm height from detecting surface
DETECTING ADJUSTMENT
 2 step
DETECTION AREA
 25(W)×50(D)mm
ALARM METHOD
 Buzzer and LED lamp
POWER SUPPLY
 1.5V Dry cell battery×2(AAA)
DIMENSION
 58(W)×195(L)×50(H)mm
WEIGHT
 212g
FEATURES
●φ0.8mm  This new handy type needle detector can detect φ0.8 mm steel at 5mm height from detecting unit surface. 
●Battery save function  Under stand by, Battery mode is changed to save mode automatically and save battery consumption. When take it by hand, the machine start automatically. New designed detecting circuit is low electric consumption. ●Light weight  The weight is only 190g that is more light 10% than previous model. New designed body help you to grip for long time without fatigue. 
●Large size LED lamp  It is easy to check the detecting result by adapting large size LED lamp. 
●Sensitivity select switch  The new handy type needle detector adopts Hi/Low sensitivity select sewivh.

Download : Hashima HN-30 Datasheet 

===================

Untuk Info dan Pemesanan Hubungi :
DARMATEK
Contact: Subarkah
Telpon : 021-71031268
H P : 081283804273/085774067221
WA  : 0081932632003
Email : subarkah18@yahoo.co.id
Gmail : darmatek1@gmail.com
Pin BB : D2A771BD
Link : http://darmatek.indonetwork.co.id
http://darmatek01.blogspot.com
Web : http://www.darmatek.net

Sunday, September 9, 2018

Jual Dwyer A3000 Photohelic®

No comments:
Darmatek $0.00

Keterangan :

Photohelic® Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic® gage design. The Photohelic® switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).

Photohelic Sensing - How It Works
In typical applications, these Dwyer switch/gages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation.

Relay-Transformer Features
A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.

Jual Dwyer 605 Magnehelic Indicating Transmitter

No comments:
Darmatek $0.00

Keterangan :

The Series 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system. The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4-20 mA control loop powered by a 10-35 VDC supply.

GAGE SPECIFICATIONS :
Service: Air and non-combustible, compatible gases.
Wetted Materials: Consult factory.
Accuracy: See Ordering page.
Stability: ±1% F.S./yr.
Pressure Limits: See Ordering page.
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
Process Connections: 1/8" female NPT.
Size: 4" (101.6 mm) dial face, 5" (127 mm) O.D. x 2-11/16" (68.3 mm).
Weight: 1 lb, 12.6 oz (811 g).
Agency Approvals: CE.

TRANSMITTER SPECIFICATIONS :
Accuracy: See Ordering page (includes linearity, hysteresis, repeatability).
Temperature Limits: 20 to 120°F(-6.67 to 48.9°C).
Compensated Temperature Range: 32 to 120°F (0 to 48.9°C).
Thermal Effect: ±0.025% F.S./°F (0.045% F.S./°C).
Power Requirements: 10-35 VDC (2-wire).
Output Signal: 4 to 20 mA.
Zero and Span Adjustments: Protected potentiometers.
Loop Resistance: DC; 0-1250 ohms maximum.
Current Consumption: DC; 38 mA maximum.
Electrical Connections: Screw terminal block.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.

Darmatek

Jual Dwyer 475-00-FM Mark III, 0-4.0" w.c. Differential Pressure Digital Manometer Handheld

No comments:
Darmatek $0.00

Description :

Dwyer 475-00-FM Manometer 4 inch WC Intrinsically Safe FM Approved is designed to measure positive, negative, and differential pressure of air and natural gases from 0 to 4.000 in w.c. The Dwyer 475-00-FM can also measure air velocity when used with a pitot tube. The Dwyer 475-00-FM features tough aluminum housing, an easy-to-read display, automatic zeroing, and is intrinsically safe to use in hazardous locations.

Spesification :

Handheld digital manometer, range 0-4.000" w.c. (0.996 kPa), max. pressure 5 psig.
Service:
Air and compatible combustible gases.
Wetted Materials:
Consult factory.
Accuracy:
±0.5% Full Scale, 60 to 78°F (15.6 to 25.6°C); ±1.5% Full Scale from 32 to 60°F and 78 to 104°F (0 to 15.6°C and 25.6 to 40°C).
Pressure Hysteresis:
±0.1% of Full Scale.
Pressure Limits:
5 psig..
Temperature Limits:
0 to 140°F (-17.8 to 60°C).
Compensated Temperature Limits:
32 to 104°F (0 to 40°C).
Storage Temperature Limits:
-4 to 176°F (-20 to 80°C).
Display:
0.42" (10.6 mm) 4-digit LCD.
Resolution:
See Ordering page.
Power Requirements:
9 V alkaline battery, installed non-functional, user replaceable.
Weight:
10.8 oz. (306 g).
Process Connections:
Two barbed connections for use with 1/8" (3.18 mm) or 3/16" (4.76 mm) I.D. tubing. Two compression fittings for use with 1/8" (3.18 mm) I.D. x 1/4" (6.35 mm) O.D. tubing for 475-7 & 475-8 only.
Agency Approvals:
CE.
Darmatek

Saturday, September 8, 2018

Jual Dwyer 2300-600PA Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Jual Magnehelic: Pascals (Pa) - Zero Center

Magnehelic: Pascals (Pa) - Zero Center
Available Pascal (Pa) - Zero Center Ranges for Dwyer Magnehelic Manometer Differential Pressure Gauge:

2300-60PA: 30-0-30 Pa, minor divisions 2.0
2300-100PA: 50-0-50 Pa, minor divisions 2.0
2300-120PA : 60-0-60 Pa, minor divisions 2.0
2300-250PA : 125-0-125 Pa, minor divisions 5.0
2300-500PA : 250-0-250 Pa, minor divisions 10.0

Model Notes:

Model 2300-60PA: Calibrated for vertical scale position. Accuracy +/- 4%.
Model 2300-100PA: Calibrated for vertical scale position. Accuracy +/- 3%.

Order accessories for your Dwyer Static Pressure Gage below:

Jual Magnehelic: Pascals (Pa) - Zero Center

Choose Measuring Range:: 30-0-30 Pa, minor divisions 2.0; 50-0-50 Pa, minor divisions 2.0; 60-0-60 Pa, minor divisions 2.0; 125-0-125 Pa, minor divisions 5.0; 250-0-250 Pa, minor divisions 10.0

Jual Dwyer 2300-60PA Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Keterangan :
Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved.)

Jual Dwyer 2300-120PA Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Keterangan :
Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved.)

Jual Dwyer 2030 Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Keterangan :
Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved

Jual Dwyer 2001D Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Keterangan :
Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved.)

Friday, September 7, 2018

Jual Dwyer 2001 Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Keterangan :
Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved.)

Jual Dwyer 2000-125PA Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Keterangan :
Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved.)

Jual Dwyer 2000-10KPA Magnehelic® Differential Pressure Gage

No comments:
Darmatek $0.00

Keterangan :

Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved.)

Costumer Care


Hotline : 0812 8380 4273
SMS : 0857 7406 7221
WA : 0819 3263 2003
Email : info@darmatek.net
Email : subarkah18@yahoo.co.id
Gmail : darmatek1@gmail.com
Pin BB : D2A771BD

Rekening



No. Rek: 733-0921-913
a.n : SUHARTINI

No. Rek: 0288-773-200
a.n : SUHARTINI

Lacak Resi


Lacak resi JNE di sini
Lacak resi TIKI di sini:
Lacak resi POS Indonesia:

Aman dan Terpercaya


Pengunjung